A Simple Guide to Better Understanding Fiber Optic Installation







‚ÄčOne of the reasons why more and more people prefer to get fiber optic cables is the fact that they are just very easy to install. In the past, if you want to establish some sort of connection, you have to deal with complicated and heavy cabling. With fiber optic cables, however, this is not the case because not only are they easy to installed but very light and flexible as well. The process of installing fiber optic cables is more or less the same as installing other wire cables. And yet, when it comes to the tools, method, and instruments used, they are never the same.

There are different ways of installing fiber optic cables from O.B. One Communications. Such cables are being installed for the purpose of outdoor underground or indoor underwater applications. Owing to the fact that there are different kinds of cables that can be used as well as different applications, there is not one set of rules for its installation. However, there are general rules to properly installing fiber optic cables or any cable for that matter.

Be sure to read this article till the end for more info. Despite the fact that data cable installations and network cable installations are best done by the professionals, it will be to your advantage if you know even some basics about the entire process. View this website https://en.wikipedia.org/wiki/Structured_cabling about cabling.

Site survey: The special needs of your location will say a lot about how the cables must be installed that is why this process must be done. Surveying the site helps in finding out about the surrounding environmental and physical hazards. Surveying the site also aids in being able to make a good plan on the placement of the machinery as well as the route of the cables. This plan is very much essential for installing fiber optic cables in spas and pools.

Cable stretching plan: So that adequate fiber optic cabling is done, the location of access points and junctions, requirement of cable pulling equipment, and splice setting must all be planned out. When lightning strikes, you can better protect your cables with having a complete system installed with the right type of fiber like the side glow type or the end glow type.

Avoid twisting cables and exceed its bend radius: When you twist your fiber optic cables, you are putting a limit to its efficiency because of the stress that you are putting to it. See to it that you do not practice this one when you are applying your cables for lightning. Moreover, so as to avoid breaking your fiber optic cables and damaging them, never exceed beyond their bend radius. Your bend radius should be twenty times smaller in comparison to your cable diameter. And in terms of its diameter, the bend upon final network cable installation must be ten times smaller.