I think you should look for some professional woodworking guide.Here is my favorite woodworking guide you wont need anything else Details Here Here is an honest review of WoodPrix Plans Pros: If you want to start a woodworking project, you need all the necessary information, including schematics, blueprints, materials lists, dimensions etc. That is where WoodPrix Woodworking Instructions comes in. The plans are clearly drawn and there're step-by-step explainations of how the plan should be done and put together. There are several other sites whose collection of plans have the dimensions totally wrong without any indication of parts lists, material lists or the tools needed. If you're one of those people who have bought plans like this in the past, WoodPrix will change your perception. In WoodPrix's Woodworking you will get everything you need: -Diagrams which are detailed with a full set of dimensions -Step -by-step instructions how to start your project -The necessary materials for that particular project -All the woodworking tools you will need.
I've checked all woodworking resources on the internet and below are best woodworking tips, I hope you enjoy it.
#1. Perfect Miters Everytime Haviing troublle gettting the cornners of your DIY decor and furniiture projects to look professional? Makking wood cornners that are fllush and perrfectly aligned is not simple, but this cool DIY trick makes it easy to get perfectly mitered corners. Check out the step by step tutorial to learn how.
#2. Use woodworking plans This is one of the besst way to pussh your job. Ref source 16,000 wood plans: WoodPrix - http://www.woodprix.com
#3. Set yourself up for success Start with projects that have a good chance of success. It is far better to succeed making simple, modest pieces than to get overwhelmed, frustrated and disappointed because you bit off more than you could chew with an elaborate project. Challenges edify only if they build confidence, so keep the early ones realistic. Furthermore, a successfully completed project involves many stages: design, research, acquiring high-quality wood, configuring tools, stock preparation, joinery, surfacing, edge treatments, glue up and finishing. An extremely important part of learning woodworking is working through all the stages and appreciating how they interrelate. The learning experience can only happen if you get through all of them! What’s more, you’ll have a lasting piece — however modest — to show for your efforts.
#4. Refinishing Wood With Coconut Oil One of the best, most versatile finishes, coconut oil can be used for a warm, not too shiny and easy to take care of wood finish. Whether you are new to woodworking of a seasoned DIY pro, if you have not tried finishing wood with coconut oil, you should definitely try this idea out. Much easier to deal with than traditional wood oil, the coconut oil finish will leave your wood glowing. Hides imperfections and scratches, too! My favorite DIY trick I’ve discovered recently!
#5. Learn why it’s called woodworking To be successful at this craft, you need to be as knowledgeable and skilled at choosing wood, preparing it, and accommodating its peculiarities as you are at working it with tools. Your work will be no better than the materials you choose and your understanding of them. Unlike metal, glass or clay, wood is a product of biology and therefore extremely varied. Each species, each tree and each board is different — and the differences matter. Of course, this is part of wood’s wonderful appeal, but it does create considerable demands on the woodworker. Learn all you can about wood — it’s fascinating — and go out of your way to experience a wide variety of wood.
#6. Easy Graphic Transfer Tutorial On Wood OK, so I have seen so many cool crafts lately with distressed art and quotes on them, and I’ve been dying to try some at home. However, I had yet to figure out how to get the look for myself until now. Turns out, adding a finish to the wood with your own images and art is easy, you just use your home printer and freezer paper to create your own DIY transfers. Look at the amazing results! I have so many things I am making with this cool DIY woodworking idea, I can’t wait.
#7. Invest in great tools Like most crafts, woodworking requires a substantial infrastructure of tools. This can be intimidating and costly for a beginner, but it’s also very tempting as you browse catalogs while anticipating shiny new tools. Remember: tools are for making things, not for mere acquisition. I suggest this sequence: decide what you want to build, anticipate the steps required to build these pieces, then get the tools to perform those tasks excellently and efficiently. Avoid false economy — buy high-quality tools even if that means having fewer tools, deferring a purchase or spending more. Also, it is better to choose a top-quality, versatile tool than a highly specialized gadget, especially one that is purported to require little skill. As an example, invest in a great backsaw, learn to use it well, and build confidence, rather than timidly opting for a saw guide system that will divert you from acquiring real skills.
#8. Ars longa, vita brevis Be a good learner. With the fantastic wealth of learning sources in various media that are currently available — including craftsy woodworking classes — there is no excuse for neglecting this. Choose reliable sources, but keep in mind that there’s almost always more than one right way to do any woodworking job. Seemingly contradictory teachings may all have value. Ultimately, you have to find your way — what’s right for you in your shop. Remember, too, that there are no infallible gurus; something is not correct just because a supposed authority said so. Of course, don’t blithely dismiss expertise and tradition, but use your own brain and hands. Craft is very direct — you can see before you the honest results of your actions.
#9. Cherish your craft If craft is important to you, accept that. Trust it. Make a place for it in your life, living space and financial space. Your crafting is important for the fulfillment it brings you, as well as for the beautiful, useful things it produces to enhance your life and the lives of those around you. Invest in it with heart and means, without apology. Your work and its fruits add good to this world. Take great joy in craft!
#10. Important table saw safety When you’re crosscutting on a table saw, set the cut length with a block clamped to the fence. Don’t ever use the fence directly to avoid getting a board kicked back right at you. Instead, clamp a block of wood to the fence before the blade. Then the end of the board will be free of the fence during and after the cut. If you make a block that’s exactly 1 in. thick, you can set the fence scale at 1 in. greater than the length you’re after. No tricky fractions involved.
#11. Make your own reusable sanding block Here’s how to make your own reusable sanding blocks. Cut six blocks from scrap ¾-in.plywood for each sandpaper grit you commonly use. Make them 2-½ in. x 4-¾ in. Spray adhesive on both a square of cork tile and each block. Stick a block to the cork and cut the cork flush with a utility knife. Then spray adhesive on a sheet of sandpaper and stick it on each block cork side down as shown. Cut the sandpaper flush with the cork, and label each block.
#12. Use stair gauges as a crosscut guide Stair gauges are usually used to lay out stair jacks. You clamp them to a carpenter’s square to match the rise and run of a stair jack and then mark the notches. But if you put them both on the same tongue of a carpenter’s square, the combination makes a great crosscut guide for circular saws.
#13. Versatile and inexpensive Pick up a pair for less than $5 at any hardware store or home center. Clamp the square in place so it won’t slide around while you’re cutting. You wouldn’t like that one bit.
#14. Use tape to catch excess glue To prevent stains caused by oozing glue along joints, clamp the pieces together without glue. Put tape on the joint, then cut along it with a sharp blade. Separate the pieces, apply the glue and clamp them together again. The glue will ooze onto the tape, not the wood. Peel off the tape before the glue dries.
#15. Try cold or heat to un-stick it You have two options for breaking the grip: cold and heat. First, try sticking the work piece into the freezer for an hour or so. Frozen glue will usually give way with very little force. If that doesn’t work, try a hair dryer to soften the glue. Still stuck? Reach for the heat gun. But warm the piece slowly and from a distance to avoid scorching the wood or damaging the finish.
#16. Use a drafting square for more accuracy When you need an accurate square in the 2- to 3-ft. range, your options are limited. Drywall squares are notoriously inaccurate and cumbersome. Carpenter squares involve that nagging hassle of having to hook them onto the edge of your workpiece. If you have a drafting square lying around, drag it out to the shop. Or, go to an art supply store and pick one up ($5 or more). They’re very accurate and you’ll find yourself grabbing it nearly as often as you do the tape measure.
#17. Hot glue holds small stuff better than clamps When you have to cut, shape, file, sand or finish something small, reach for your hot glue gun and glue the piece to a pedestal stick. The hot glue will hold just about anything as well as or better than any clamp ever could—if using a clamp is even possible. When your project is complete, try to pop it loose with a putty knife, but don’t use too much force—you might tear out the wood or break the piece.
#18. Use duct tape to mark a level spot You’ve finally got your table saw on a mobile base so it’s easy to pull out and put away on the weekend. Finish the job by finding a level spot on the floor that’s also convenient for sawing boards without obstruction. Mark the wheel positions with bright-colored duct tape and now you can roll the saw to the same flat spot every time you saw.
#19. Install blade so teeth face forward Install the blade on a hacksaw so the teeth face forward. The saws are designed so the blade will cut when it’s pushed (the forward stroke) rather than when pulled. Some blades have an arrow that shows the correct installation (the arrow points toward the handle). Install the blade so it’s tight in the saw and won’t bend. When you do a lot of cutting, the blade will heat up and expand, so be sure to tighten it if it starts to bend.
