sex-is-not-a-four-letter-word.com

READY WHEN YOU ARE


INSTRUCTIONS

_______________________________


GETTING THE PERFECT ERECTION IN SECONDS

HAS NEVER BEEN EASIER!


ARE YOU READY?



step 1





Attach the pump head to the penile tube.



step 2





Place the loading cone on the other end of the penile tube.



step 3





Lubricate the cone and the inside of the tension ring. This is to make it easy for the tension ring to slide onto the penile tube.

For your first time, use the tension ring size that’s in the middle. If the ring is too tight, you can move up to a larger size.

Place the middle ring over the top of the cone and use the two handles to pull the tension ring downwards on to the penile tube.



step 4





Once the tension ring is securely on the penile tube, remove the cone.



step 5





Insert the bushing into the same end of the tube where you just removed the cone. If the tension ring is not at the top of the edge of the tube just under the bushing, you will have to slide it up at that point. If you don't, you may achieve an erection but be unable to slide the tension ring off the tube onto your penis. To move the ring up the tube, you will probably have to lightly apply some lubricant to the outside of the tube above the tension ring. Then, with your thumbs on the bushing, slide the ring up to the edge of the tube.





step 6





Liberally apply lubricant to the bushing and the pubic area where the bushing will make contact with your body. Don't skimp and leave even small areas uncovered or a perfect vacuum will not be achieved.



step 7





Place the lube-side end of the penile tube with the lubricated bushing over your penis, being sure to hold the tube firmly to create a tight seal against your body.



step 8





Begin engaging the pump by pressing the grey button. The pump will begin drawing blood into your penis, forming an erection. When you are satisfied that you have the erection you want, stop the motor by releasing the grey button.



step 9





Once you’ve achieved the desired erection, slip the tension ring off the end of the penile tube and on to the base of your penis. Press the red button to release the vacuum so that you can remove the penile tube. Sometimes, the bushing will remain on the base of the erect penis. Slide it off.

You now have a firm erection that will hold for 30 minutes, even after orgasm!



step 10





Once finished, remove the tension ring by using the handles to slide it off of your penis. Your erection will then naturally subside.

One more thing: You can safely repeat those steps within a few minutes, and as often as required per day.





Ready when you are



sex-is-not-a-four-letter-word.com